## The finite element method simulation of active optimal vibration attenuation in structures

##### View/Open

##### Date

2004-04-27##### Author

Baweja, Manish

##### Type

Thesis##### Degree Level

Masters##### Abstract

The Finite Element Method (FEM) based computational mechanics is applied to simulate the optimal attenuation of vibrations in actively controlled structures. The simulation results provide the forces to be generated by actuators, as well as the structures response. Vibrations can be attenuated by applying either open loop or closed loop control strategies. In open loop control, the control forces for a given initial (or disturbed) configuration of the structure are determined in terms of time, and can be preprogrammed in advance. On the other hand, the control forces in closed loop control depend only on the current state of the system, which should be continuously monitored. Optimal attenuation is obtained by solving the optimality equations for the problem derived from the Pontryagin’s principle. These equations together with the initial and final boundary conditions constitute the two-point-boundary-value (TPBV) problem. Here the optimal solutions are obtained by applying an analogy (referred to as the beam analogy) between the optimality equation and the equation for a certain problem of static beams in bending. The problem of analogous beams is solved by the standard FEM in the spatial domain, and then the results are converted into the solution of the optimal vibration control problem in the time domain. The concept of the independent-modal-space-control (IMSC) is adopted, in which the number of independent actuators control the same number of vibrations modes. The steps of the analogy are programmed into an algorithm referred to as the Beam Analogy Algorithm (BAA). As an illustration of the approach, the BAA is used to simulate the open loop vibration control of a structure with several sets of actuators. Some details, such as an efficient meshing of the analogous beams and effective solving of the target condition are discussed. Next, the BAA is modified to handle closed loop vibration control problems. The algorithm determines the optimal feedback gain matrix, which is then used to calculate the actuator forces required at any current state of the system. The method’s accuracy is also analyzed.

##### Degree

Master of Science (M.Sc.)##### Department

Mechanical Engineering##### Program

Mechanical Engineering##### Supervisor

Szyszkowski, Walerian##### Committee

Watson, L. Glen; Oguocha, Ikechukwuka N.; Burton, Richard T.; Boulfiza, Mohamed##### Copyright Date

April 2004##### Subject

feedback gain

Optimal gains

Modal space

Open loop control

Finite Elements

Actuators

Optimal vibration control

Computational mechanics

Simulation

Beam Analogy

observability

Sensors

Controllability